14G Internally Threaded Labret

14G Internally Threaded Labret
Details:
6AI-4V-Eli ASTM 136 implant grade titanium
Gauge available in 14Ga
Length available in 3mm - 12mm
Flat base available in 3mm - 5mm
Send Inquiry
Download
Description
Technical Parameters

Our 14G Internally Threaded Labret is machined from a single piece of solid ASTM F136 (Ti-6Al-4V ELI) implant-grade titanium - the same ELI alloy specified for bone screws, hip prostheses, and dental implants. No plating, no fillers, no mystery base metal: the surface you heal against is the metal itself, and its spontaneously forming TiO₂ oxide layer continuously renews itself in contact with tissue, keeping ion release effectively at zero. For buyers, that distinction is the whole story: "titanium" stamped on a tag proves nothing, while a batch-specific material test report does.

The 1.6 mm (14G) shaft carries internal 1.2 mm threading​, so the threaded tenon sits inside the shaft rather than protruding through the piercing channel. There are no micro-scratches to collect biofilm, and the decorative end never passes through healing tissue on removal. The flat-back disc distributes pressure across a wider area of mucosa, which is why oral and facial piercers use it in place of ball-back posts, and why a shorter post can sit flush without embedding. With one post left in place, the wearer swaps only the end - fewer insertions, less disturbance, a longer wear cycle for the same piece.

Available with 3mm/4mm/5mm disc options to match, the design is deliberately unadorned: a polished cylindrical post, radiused edges, and a back surface finished to a low Ra so it does not abrade tissue during sleep or speech. It is also MRI-safe​ (non-ferromagnetic) and can be anodised across the full colour spectrum - colour comes from an oxide-layer interference effect, never from dye or coating.

 

Product Specifications

 

Material

Solid ASTM F136 Ti-6Al-4V ELI

Gauge

14G (1.6 mm); thread pattern internal 1.2mm

Lengths

3/4/5/6/7/8/9/10/11/12mm, or customized

Disc Base

3mm/4mm/5mm

Finish

Mirror Polished

 

Why ASTM F136, and Why the Certificate Matters

 

ASTM F136 is not a marketing label. It is a written specification covering exact chemistry, interstitial-element limits, and mechanical properties for wrought titanium alloy intended for surgical implants. The ELI qualifier - Extra Low Interstitials - is the part that separates implant stock from ordinary Grade 5 aerospace titanium: oxygen below 0.13%, iron below 0.25%, and nickel governed down to trace levels. That last figure is what makes the alloy viable for clients with diagnosed metal sensitivities.

We supply a mill certificate/material test report with every production lot​. The certificate names the heat number and ties back to the actual bar stock used for the order - this is what wholesale buyers, studio chains, and marketplace compliance teams actually ask for, and it is the one document that turns "implant-grade" from a claim into evidence.

 

Now in Pure Niobium: A Second Medical-Grade Line

 

For clients who cannot tolerate even the minute alloying elements in titanium - or who want the widest possible colour range - we offer the same labret geometry in 100% pure niobium (ASTM B392). Where titanium is an alloy, niobium is used in unalloyed elemental form: nothing else is present to leach. It is nickel-free, biologically inert, does not tarnish in body fluids, and is accepted by the Association of Professional Piercers for initial and healing piercings.

The trade-off is honest and worth stating: niobium is approximately twice the density of titanium (around 8.6 g/cm³ versus 4.5), so the piece feels noticeably more substantial; it is slightly softer and typically 20–50% higher in raw material cost. The anodizing process is electrochemical rather than plated - voltage builds a transparent oxide layer of controlled thickness, producing colour through light interference, including a true black that titanium cannot reach. The colour will not chip, flake, or expose a different metal underneath, because there is no different metal underneath.

For the buyer, this means a real choice, not a marketing ladder:​ titanium for the lightest possible piece, maximum thread strength, and PVD gold or black; niobium for the most conservative material composition and the broadest colour palette. Both carry the same documentation, the same finish tolerances, and the same traceable stock.

 

 

Hot Tags: 14g internally threaded labret, China 14g internally threaded labret manufacturers, suppliers, 14G Internally Threaded Labret, 18G Internally Threaded Labret, Internal Thread Labret Jewelry, Internally Threaded Labret Post, internally threaded labrets, labrets

Send Inquiry